Compact yet powerful, this fast and agile LED wash light moving head features RGBW color mixing and a 20o fixed beam angle. Unique wash beam effects are possible via electronic dimming and strobe.

LED wash light moving head
Compact yet powerful
RGBW color mixing
10o fixed beam angle
Extremely fast and agile
Electronic dimming and strobe
3 & 5 pin XLR


Length: 258 mm (10.2 in.)
Width: 156 mm (6.1 in.)
Height: 305 mm (12.0 in.)
Weight: 5.7 kg (12.6 lbs.)

Dynamic Effects

Color mixing: RGBW
Electronic ‘color wheel’ effect: 33 LEE-referenced colors plus white, variable-speed color-wheel rotation effect and random color
Electronic ‘shutter’ effect: Strobe effect, pulse effects, instant open and blackout
Electronic dimming: 0 – 100%, four dimming curve options
Pan: 540°
Tilt: 180°

Control and Programming

Control options: DMX, stand-alone
DMX channels: 12
Stand-alone trigger options: Music trig, auto trig
Stand-alone options: 4 pre-programmed shows
Stand-alone memory: 20 scenes
White balance control: RGB adjustment
Setting and addressing: Control panel with LCD display
Protocol: USITT DMX512/1990


Light source: 7 x 10 W RGBW Cree MC-E LEDs
Minimum LED lifetime: 50 000 hours (to >70% luminous output)*
*Figure obtained under manufacturer´s test conditions


Color: Black
Housing: High-impact flame-retardant thermoplastic
Protection rating: IP20


Mounting points: Hex bolts
Location: Indoor use only, must be fastened to surface or structure
Orientation: Any


AC power in/thru: Neutrik PowerCon
DMX data in/out: 3-pin and 5-pin locking XLR


AC power: 100-240 V nominal, 50/60 Hz
Typical total power consumption: 135 W
Power consumption figures are typical, not maximum. Allow for +/-10% variation.


Cooling: Forced air (temperature-regulated, low noise)
Maximum ambient temperature (Ta max.): 40° C (104° F)
Minimum ambient temperature (Ta min.): 0° C (32° F)