Martin Professional – RUSH MH2 Wash

Compact yet powerful, this fast and agile LED wash light moving head features RGBW color mixing and a 20fixed beam angle. Unique wash beam effects are possible via electronic dimming and strobe.

  • LED wash light moving head
  • Compact yet powerful
  • RGBW color mixing
  • 10o fixed beam angle
  • Extremely fast and agile
  • Electronic dimming and strobe
  • 3 & 5 pin XLR


Length: 258 mm (10.2 in.)
Width: 156 mm (6.1 in.)
Height: 305 mm (12.0 in.)
Weight: 5.7 kg (12.6 lbs.)

Dynamic Effects

Color mixing: RGBW
Electronic ‘color wheel’ effect: 33 LEE-referenced colors plus white, variable-speed color-wheel rotation effect and random color
Electronic ‘shutter’ effect: Strobe effect, pulse effects, instant open and blackout
Electronic dimming: 0 – 100%, four dimming curve options
Pan: 540°
Tilt: 180°

Control and Programming

Control options: DMX, stand-alone
DMX channels: 12
Stand-alone trigger options: Music trig, auto trig
Stand-alone options: 4 pre-programmed shows
Stand-alone memory: 20 scenes
White balance control: RGB adjustment
Setting and addressing: Control panel with LCD display
Protocol: USITT DMX512/1990


Light source: 7 x 10 W RGBW Cree MC-E LEDs
Minimum LED lifetime: 50 000 hours (to >70% luminous output)*
*Figure obtained under manufacturer´s test conditions


Color: Black
Housing: High-impact flame-retardant thermoplastic
Protection rating: IP20


Mounting points: Hex bolts
Location: Indoor use only, must be fastened to surface or structure
Orientation: Any


AC power in/thru: Neutrik PowerCon
DMX data in/out: 3-pin and 5-pin locking XLR


AC power: 100-240 V nominal, 50/60 Hz
Typical total power consumption: 135 W
Power consumption figures are typical, not maximum. Allow for +/-10% variation.


Cooling: Forced air (temperature-regulated, low noise)
Maximum ambient temperature (Ta max.): 40° C (104° F)
Minimum ambient temperature (Ta min.): 0° C (32° F)